Repair of a Crack in Fiberglass
Cracked fiberglass panels should be repaired before the crack worsens. A crack can continue to spread and also cause leaks through the fiberglass panel. Gelcoat is intended to be a protective barrier to keep moisture from the underlying surface.
Cracks also are ugly. They detract from the good looks of a fiberglass panel.
Fortunately these can be repaired. A short demonstration of the basics from BestBathUSA on Youtube.
The actual repair is more involved, but it is possible to do it yourself. The correct tools and materials are required, but are widely available.
Custom Fiberglass Speaker Boxes
Fiberglass materials allow for custom shapes and features. A very popular Do It Yourself project is custom speaker boxes for automobiles.
To accomplish this, it is important to begin with a solid foundation material. Very often this is wood, which allows for screwing and stapling. Next, the speaker mounts need to be properly attached. Orientation of the mounting surface is established for the speaker that will be used in the finished installation.
Fleece fabric material is one method that is used to span the surfaces and transition across the different areas. This material allows for smooth transition, holds staples, is easy to work with, and is inexpensive. Once it is in place it can be covered with resin and fiberglass to establish a solid surface. This can be sanded smooth and painted for full effect.
WestCoastCustomsTV demonstrates how the fleece is applied in the video below:
Composite Guitar Cases
Not being a musician, I had not been familiar with instrument cases, specifically for guitars. Many of them are made of composite materials, both fiberglass and carbon fiber.
The advantages of composites align well with requirements for handling musical instruments. Composites are strong and lightweight, as well as impact resistant. Composites are also not affected by moisture.
I came across an interesting video by WallyUpdabungenstein who does a comparison of a Calton deluxe fiberglass guitar case as compared to a Hoffee carbon fiber guitar case.
He does a great job comparing the actual fit and handling of the guitar in the case. He does not discuss the construction materials of the cases, but does look at the important aspects of them. Any item that is intended for a primary purpose such as protecting musical instruments needs to do a good job at this primary purpose.
Compression Molding Large Vehicle Parts
Compression molding with composite resins can yield very durable, strong, and well-engineered parts.
Placing reinforcements (usually fibered glass) and resin in a heated metal mold before compressing it under high temperatures will result in a finished piece with very unique properties. The parts made in these matched metal molds have very repeatable properties, high strength to weight ratios, and are corrosion and chemically resistant. The parts can be painted, and have many positive design attributes.
Ashley Industrial Molding is a company that manufactures such parts. These large parts are made with compression and RIM molding for customer such as John Deere and Case tractors. They have a good video demonstrating their equipment, processes, and finished parts.
Cutting Epoxy/Fiberglass with Ring Saw
Cutting and machining of cured composites parts can be challenging. Cured composites can wear cutting blades out very quickly. They are also very dusty when cut without using some sort of cutting fluid.
Many of these problems can be eliminated with the proper equipment. I found a very interesting video of a fiberglass-reinforced epoxy resin block being cut using a water-cooled ring saw. This saw is called the Revolution XT and it uses some neat technology to get a relatively quick and clean cut without making dust. It looks like it would also allow some good freehand movement to cut curves and angles in composites parts.
Cirrus Composite Airframes
I found a very interesting Youtube peek inside of the Cirrus airplane assembly factory in Minnesota. While it would be cool to learn more about the actual composites fabrication of the individual parts, there is some great information about part bonding, inspection, and final assembly of the Cirrus aircraft. They use fiberglass and carbon fiber reinforcements to create a very strong and durable fuselage, and it is great to see in action.
Personal jets made of composite materials offer many advantages and unique properties. Design of complex shapes and anti corrosion of aluminum are two advantages. Disadvantages include repeatability and upgrading/modification.
Composites that are properly designed and fabricated can be used in many applications where safety is a big concern. Proper design and inspection during production can create an airplane that can be easily maintained and have a very long life.
Great factory tour courtesy of Aero-TV:
Sponsor
